In the majority of cases, most individuals spend quite a lot of money purchasing their lift truck. Therefore, it is extremely essential to take good care of it so as to protect your investment well into the long run. It is really a great idea to know the procedures which are carried out during taking care of and maintaining this machine.
By starting up the forklift and listening closely how it runs is among the best ways to tell how good the engine is running. For instance, if there are any misses or knocks, the machinery is faulty and this must raise several concerns. What's more listen closely for any squealing sounds that come from the belts because these noises will provide you with a lot of information.
Several of the main parts requiring attention during maintenance include the horn, safety warning devices, gauges, the overhead guard and the lights. Any faulty components or burnt out light bulbs need to be replaced as soon as they are noticed. It is also essential to inspect the wiring.
The battery compartment terminals should be cleaned after the above components have been inspected thoroughly. If the terminals are not clean, be sure to clean them well. Every battery cell must be inspected in order to make certain that the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machine and then change the filters. The hydraulic filter, the transmission filter and the fuel filters must be replaced regularly. Prior to fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
When the oil change has been completed and new filters have been fitted, visually check the drive axle from underneath the equipment. Be sure to grease the axle if there is any grease fitting. Check the belts on the engine for any frays or cracks. If you find any, fix the issue accordingly. Afterwards, inspect each and every other part of the machine like the wheels. If any kind of issue or fault is detected, be certain to address it immediately in order to make certain the machine is running at its safest and optimum levels.