Forklift Attachments Texas - Without forklift attachments, many jobs would be difficult, if not impossible. There are numerous forklift attachments that make jobs faster and safer to complete. Forklift operators require training for each attachment they will be using as well as their general forklift training.
There are many non-hydraulic attachments and hydraulic attachments available for forklift attachments. They provide many benefits including decreasing fuel consumption, time, man-power, damage to stock and employee accidents.
Equipment Considerations
Forklift attachments can be switched out to replace existing attachments or may be used on machines that don’t currently have one. Several equipment-related factors must be considered before any forklift attachment is replaced or added. These considerations include:
1. The forklift type;
2. The forklift’s capacity;
3. The carriage type; and
4. The number of hydraulic functions.
Failing to take these aforementioned factors into consideration can create extra safety hazards and risks for the operator, the forklift, its’ attachments and the stock. Further safety factors must also be taken into consideration, which will be discussed in greater detail below.
Forklift Rating and Re-Rating
Forklifts are given lift capacity ratings by the manufacturer which will need to be adjusted if adding or changing a forklift attachment. There are calculators available online from forklift attachment manufacturers to estimate each attachments particular lifting capacity. However, only the forklift manufacturer can provide accurate lifting capacities.
Before installing any kind of attachment, it is essential to contact the local authorized forklift dealer of the particular forklift brand to request that they rate the machine accordingly with the attachment being used. There will be a new specification plate that is factory authorized once the forklift manufacturer has re-rated the machine. The newly upgraded specification plate will replace the original plate and needs to be installed showing the new forklift rating.
Equipment Upgrades
Forklift attachments rely on the machine’s hydraulic function and are made up of a forklift valve that has a lever situated close to the operator. This creates two passages of pressurized hydraulic oil for powering the attachment features. While not all forklift attachments are hydraulic, hydraulic attachments often include more features than the forklift has valves. In these instances, one or more valves need to be added. There are several methods of adding a valve. There are many ways to add a forklift valve.Equipment manufacturers make forklift accessories for hose routing and valve placement. There are plenty of labor and parts involved which can be costly enough to make this an impractical solution. Other options include adding a cable reel and a hose in conjunction with a solenoid valve to divert oil from an existing location. However, the operators’ view may be compromised due to the cable reels and hose installation. These parts also may be easily damaged by their location. There are kits available that use a solenoid valve and specialty hoses that allow for the reinforced braid to double as an electrical conduit. These hoses are designed to replace existing ones and stay free from being damaged. The operator can enjoy a clear view with this option.
Safety Considerations
Proper training must be obtained prior to fitting any forklift attachment. Operators need to be competent with removing, operating and fitting the attachment before using it.
Two important safety factors must be considered before the use of any forklift attachment.
The nominal load rating will be reduced on the forklift once any attachment is applied. Forks and a stock fork carriage compute the nominal load rating; although, the precise load rating may be much lower.
Using any type of forklift attachment will affect the center of gravity on the machine. This will reduce the forklift’s stability. Due to the attachment weight being situated in front of the fulcrum point, the forklift needs to be driven as though it is partially loaded even when it is empty. Thus, when using any attachment, an operator should travel at a slow speed and make turns slowly and gently. Every attachment should be listed on the forklift capacity data plate.
To maintain safety, special checks need to be completed before using any forklift attachment. The forklift attachment needs to be the right one for the type of forklift being used, appropriate for the load at hand, correctly attached, locked in place and permitted on the data plate of the forklift.
List of Common Forklift Attachments
Below is a list of popular forklift attachments and their general uses. There are many more attachments available than are listed here but this will cover the most widely-used. The variety of attachments can drastically increase efficiency for many jobs.
SIDESHIFTER:
Allows the operator to move the forks laterally, allowing for easier placement of a load without the need to reposition the entire forklift.
FORK POSITIONERS:
The fork positioners adjust for different loads by moving the forks together or apart in relation to each other.
DIMENSIONING DEVICES:
Dimensioning devices feature cargo dimensions useful for creating better efficiency in trucks, trailers and warehouses. This technology is often used alongside billing systems that monitor volume.
ROTATOR:
A rotator helps to straighten tilted skids and handle custom load requirements and fast unloading. Numerous attachments have a rotator feature.
ROLL AND BARREL CLAMP:
Allows for grasping of load with a rounded shape, such as rolled material and barrels, often with various pressure setting to avoid damage to more fragile materials. These attachments sometimes also have a rotate function to assist with, for example, rotating an item from a horizontal to a vertical position.
CARTON AND MULTIPURPOSE CLAMP:
The carton and multipurpose clamp has pressure settings and is used for handling more squared shaped loads. It easily masters boxes, bales and cartons.
POLE ATTACHMENTS:
Long, metal pole used in place of forks to lift rolled items such as carpet or linoleum.
SLIP SHEETER OR PUSH-PULL:
Slip sheeter or push-pull attachment lets the operator move slip sheets with a clamping option instead of pallets. It can pull the slip sheet onto thin and wide metal forks to facilitate pushing or loading. The attachment variations include “Save,” where the slip sheet is removed to be used again or “Standard.”
DRUM HANDLER:
The drum handler is built for holding drums. It may have arms that encompass the drum for transporting or it may feature a spring-loaded jaw to grip the drum’s top lip.
DRUM AND STORAGE BIN TIPPER:
The drum and storage bin tipper helps to transfer loose or liquid items into other containers.
MAN BASKET:
The lift platform known as a man basket is designed to transport workers vertically. It is outfitted with brackets and railings to anchor safety harnesses.
TELESCOPIC FORKS:
Allows operation in a warehouse using two pallet stacking where one shelf is placed directly behind another with no aisle between the two.
SCALES:
Scales allow forklift operators to weigh their pallets during transport. This increases efficiency by providing simultaneous data and not making the operator travel back and forth to scales. This attachment can be used for operators who bill by weight in legal-for-trade applications.
SINGLE-DOUBLE FORKS:
Allow movement of a single pallet or platform or two pallets side by side. With the correct attachment/s a single forklift can be used for multiple specialist materials handling tasks alongside normal lifting tasks, thus reducing the need for owning a specialist unit alongside a normal unit and the larger running and maintenance costs associated with multiple units.
SNOW PLOW:
Snow plows are used to remove snow and redistribute it; however, this attachment can be used with other loose kinds of material.
SKIPS:
Skips enable quick and safe waste removal to a skip or waste compactor. They may feature a bottom-emptying design or be a roll-forward model.
BOOMS AND JIBS:
Jibs and boom offer extended forklift reach for transporting loads that are stacked deep or high or that are suspended. There are reach-over, low profile, precision lifting and extendable length options.
Forklift Attachment PDF
